Who Knows How Many Rear Fenders Backup Cams Have Saved? Not Just Fenders, But Also Our Children’s Bicycles.

However, like with every new function you’ll discover on a Ford Edge, it’s occasionally simply another thing to deal with.

What is the procedure for resetting the backup camera on a Ford Edge?

There are two approaches you may take.

The first is a soft reset, which involves just pressing the camera’s reset button for 10 seconds.

The next step is to do a hard reset, which entails removing the vehicle’s battery.

Below, we’ll go a bit more particular.

We’ll also go over how a backup camera works, how to maintain one, and how to deal with some of the most typical concerns that Ford Edge drivers experience with them.

Continue reading if you need to know or are just interested.

Examining the Backup Camera

We don’t need to go over the fundamentals with you.

It’s a camera connected to a display that allows you to view what’s going on behind you.

The backup camera’s gimmick is that the picture is mirrored before being delivered to you.

You’ll have an easier time overcoming barriers this way.

If a garbage can shows on the monitor’s left side, it’s behind the automobile on your left.

It’s on the right if you notice a cinder block on the right.

The most typical issues with these cameras aren’t truly technical difficulties, but rather the lens being filthy.

If you live someplace where there is a lot of rain, snow, or muck, this occurs often.

All you have to do now is brush off any large pieces of mud and debris, sprinkle your microfiber cloth with windshield washer or rubbing alcohol, and wipe in a circular motion.

You should be able to see well now.

What to Do If Your Backup Camera Isn’t Working

It’s impossible to overestimate how simple it is to execute a soft reset.

You have two cameras, one of which has a separate reset button.

All you have to do now is press the button down for roughly 10 seconds, and your camera will be reset to factory settings.

Check your owner’s handbook if you can’t locate the reset buttons.

Depending on the model year and trim level, it may be at a different location.

The hard reset is a bit more difficult, but it’s still doable.

This is how you do it:

  • Make sure the vehicle is switched off before opening the hood.
  • Remove the battery from your device. Always pull the negative cable first, then the positive cable after disconnecting.
  • To drain the remaining energy, start your automobile and hit the horn or switch on the headlights.
  • Restart the vehicle.
  • Connect the battery again. This time, the good comes first, followed by the negative.

A hard reset can clear all of the electronics in almost any car, and you may do it whenever your system is acting up.

However, everything will be reset, including radio stations, Bluetooth connections, system settings, and so on.

So, first and foremost, attempt to locate the reset button.

The Importance Of Convenience Cannot Be Overstated.

One of the best things about the Ford Edge is that it’s not only simple to drive, but also to maintain.

With a single button, you can solve a lot of issues.

That’s usually a wonderful thing to uncover while reading the Vehicle History when auto purchasing.

How Do I Reset My Backup Camera Videos Suggestions From Youtube

backup camera black screen fix – HBEmele
2011-2019 Ford Explorer Backup Camera Not Working? Check This BEFORE Replacing It! – FordTechMakuloco
Ford Taurus – Backup / Rear View Camera Not Working? TRY THIS “RESET” – QuiteAlright

Published on

Written by Bob Matsuoka
Bob Matsuoka is a blogger and founder of RVing Beginner blog. He has been blogging for over five years, writing about his own family’s RV adventures, tips for people who are interested in buying an RV or taking their family on an adventure by RV.