How To Change A Whirlpool Water Filter

Your refrigerator’s water filter puts a lot of effort into keeping your drinking water pure and flavorful. It has to be regularly replaced; we advise doing it once every six months or so, in order to maintain it that way. Finding your filter and swapping it out for a new one is simple. Learn where to quickly locate and change the Whirlpool® refrigerator water filter in the following paragraphs.

Locating And Changing Your Refrigerator’s Filter

You need to be aware of what you have before you can change your refrigerator’s water filter.

Find the authorized water filter for your Whirlpool® refrigerator by looking at the number written on it.

Care advice: Once you are aware of the kind of your filter, think about subscribing to have a new filter sent to you automatically every three or six months.

1. How To Change The Water Filter In A Refrigerator

How-To Video to Watch

Filter 1

by Whirlpool^®

Buy now

Filter 1

by everydrop^®

Buy now

Filter 1: Detailed Directions

1. Find the water filter cover in the base grille or the top right corner of your refrigerator.
2. Ascend the filter door.
3. Remove the filter and throw it away.
4. Remove the O-rings’ protective covers by opening your new filter. After removing the lid, check to see whether the O-rings are still attached.
5. Make sure the arrow is facing up when you place the new filter into the slot. Never pressurize the water filter. If it is difficult to insert, rotate it until the grooves and notches are correctly lined up.
6. To make the filter door secure, push it shut.
7. Run four liters of water through the pipe to adequately flush the new filter after you’ve changed your filter.

2. How To Change The Water Filter In A Refrigerator

How-To Video to Watch

Filter 2

by Whirlpool^®

Buy now

Filter 2

by everydrop^®

Buy now

Filter 2: Detailed Directions

1. Find the water filter lid in the refrigerator’s top right corner.
2. Pull the filter door open.
3. Turn the filter to the left and pull it until it is pointed downward. Throw out the old filter.
4. Remove the O-rings’ protective covers by opening your new filter. After removing the lid, check to see whether the O-rings are still attached.
5. Make sure the arrow is facing up when you place the new filter into the filter slot. The filter will begin to spin as you press in.
6. The filter must be turned clockwise until it latches.
7. To make the filter door secure, push it shut.
8. Run four liters of water through the pipe to adequately flush the new filter after you’ve changed your filter.

3. How To Change The Water Filter In A Refrigerator

How-To Video to Watch

Filter 3

from Whirlpool®

Buy now

Filter 3

from everydrop®

Buy now

Filter 3: Detailed Directions

1. Find the water filter cap on the left side of the base grille of the refrigerator.
2. To let the filter go, press the eject button.
3. Remove the filter and throw it away.
4. Remove the O-rings’ protective covers by opening your new filter. After removing the lid, check to see whether the O-rings are still attached.
5. Align the ridges on the replacement cartridge before adding the filter cover. To secure, turn the cap in a clockwise direction.
6. Make sure the arrow on the new filter is pointing to the left before installing it in the slot.
7. until the eject button pulls back out, insert the filter.
8. Run four liters of water through the pipe to adequately flush the new filter after you’ve changed your filter.

4. How To Change The Water Filter In A Refrigerator

How-To Video to Watch

Filter 4

from Whirlpool®

Buy now

Filter 4

using everydrop®

Buy now

Filter 4: Detailed Directions

1. The water filter cover is in the inside of your refrigerator, at the top right corner.
2. Push on the filter tab if it is facing outward in your refrigerator and pull the lid down. Pull forward and downward on the little lever to open the lid if the tab is on the bottom of the cover.
3. Pull while turning the filter to the left. Throw out the old filter.
4. If this is your first time installing the filter, you will discover a cap there. Pull it out by turning it counterclockwise.
5. Line up the grooves on the new filter with the slot, press it in, and then rotate it to the right.
6. To secure the filter, press it up.
7. To make the filter door snap shut, raise it.
8. Run four liters of water through the pipe to adequately flush the new filter after you’ve changed your filter.

How To Change A Whirlpool Water Filter Videos Suggestions From Youtube