The issue with the digital era is that when digital items malfunction, it may be difficult or costly to have them fixed.

The replacement may seem like a good choice, but it is either too costly or you don’t know what to use in its stead.

Can I get a new thermostat for my RV? When it comes down to it, you can replace just about any item, even an RV thermostat.

What kind of activity do you wish to replace the thermostat with? Replacing the present thermostat with the aforementioned unit is a given if you all have faith in Dometic goods.

Just keep reading to find out more about replacing Dometic thermostats.

The information you need to know about clubs to make the best selection is available thanks to information technology.

Obtaining the appropriate data will prevent difficulties in the future.

Can I Use Any Thermostat To Replace The One In My RV?

Yes, it is feasible to replace an RV thermostat, but there are a few things you should know before making a hasty purchase of a subpar alternative.

First, the 12 Volt RV electrical system is intended to support the RV thermostat’s operation.

The majority of home and other thermostats are designed to operate on a 24-volt system.

Before you can utilize information technology without too much adaptation, your replacement will need to be built to operate on a 12-volt system.

Furthermore, home thermostats are only designed to control one fan speed.

You would need to build a switch to account for this variation if your RV has a two-speed fan system.

The installation is simple, but the first time you wash yourself, the appearance may not be ideal.

The switch may either dangle there or you can connect it to the wall at a handy location.

Check the present thermostat kickoff before getting and buying a new.

It could simply need a simple reset before functioning normally once again.

The procedure you employ to reset the thermostat should be described in your owner’s handbook.

Oh, and Dometic thermostats appear to need that they be switched off first in order for you to see the room’s real temperature.

Although rather annoying, this is how Dometic constructed its thermostats.

Upgraded Dometic RV Thermostat

By using information technology, you may replace your electric Dometic thermostat with a superior Dometic model.

The firm manufactures a variety of thermostats, all of them are intended for recreational vehicles (at least the ones made for RVs are).

There are at least two possibilities for you to consider, with the Dometic Single Zone RV Air Conditioner Thermostat being the first.

Although it reads “A/C thermostat,” this single zone measuring device also controls your furnace.

Its ability to employ sensors rather than touching buttons—although there will still be some tapping involved—is its claim to fame.

You may manage the heating, cooling, and other functions you choose to use with gentle touches on the iii input regions.

The Dometic Comfort Control Center will be the second upgrade option.

Although this device may have more buttons to press, you will still be able to regulate how your vehicle is heated and cooled better than you can with standard thermostats.

Information technology is a programmed tool with all the buttons visible up front so that you can easily find them.

Additionally, those buttons control the clocks, fans, and other important elements.

You should have no issue determining that you made the choices you desired since the display should be easy to read.

In one scenario, after you’ve made your decisions, you may just relax and enjoy the conveniences your heating and cooling functions provide.

What Is The Best Way To Remove A Dometic Thermostat?

The upgrade’s easiest step will be to remove the thermostat.

Installing the new improved model might be challenging, especially if it has more cables than the outdated one it is replacing.

Get a flat-head screwdriver first, and then locate the notch that has to be pryed up.

Put the screwdriver in that notch and release the thermostat’s outer shell.

Be cautious since not all thermostats feature the aforementioned mode, and others just have a tab that has to be pushed.

The screws holding the thermostat to the wall must then be removed.

When you handle the cables, you will have a little breathing room and room to move as a result.

If you complete the cables in a fourth dimension, you’ll be able to mark them and make sure they don’t slip back into the wall.

You will have to spend more time digging them out if the latter occurs.

You could have problems connecting the wires to the correct terminals on the new thermostat if you don’t mark them.

If you have problems re-wiring, you can connect the wires to the incorrect terminal, which would prevent various functions from functioning.

The thermostat should easily fall into your hands when you remove the cables and screws.

Additionally, if the heater or air conditioner won’t come on after the new thermostat is installed, you may need to switch on the one-time thermostat to determine if the issue is with the new thermostat or the heater or air conditioner itself.

Installation of a Dometic Capacitive Affect Thermostat

For installing this unit of measurement in your RV, Dometic offers a kit.

However, the provided instructions are just pictures and not in text format.

You will be given access to that website, after which you may learn more about how to install this device.

Visit this site to purchase the kit.

The link to the instructions is included in the download section.

The electrical design schematic is then available to you through this link.

The most important thing is to make sure that everyone raises the wires to the right spot.

If you don’t do that, you may have to spend some time deciding which cables to relocate to where they should be, among other things.

If everything is connected properly and everything works, look at the breakers that control the thermostat.

If they trip, the gadget won’t gain any functionality.

Reset the breakers to restore electricity, and you may resume your efforts.

Crossed wires have the potential to trigger the circuit breaker, shielding you from further injury.

Additionally, ensure sure the master power is switched on.

Even though this wiring work is straightforward, it would be advisable to hire a professional to do it for you.

They can guarantee that all problems are prevented.

Dometic RV Thermostat Fahrenheit to Celsius Conversion

According to Dometic, pressing both the upward and downward buttons at the same fourth dimension is the proper way to convert your thermostat’s reading from Celsius to Fahrenheit.

At 90 degrees F, or about 30 degrees C, most Dometic furnaces will reach their maximum temperature.

Additionally, if you have problems with a lack of warmth, the thermostat may not be the issue.

The ducting may not be connected to the plenum in certain RV models that use the Dometic system.

Sometimes while assembling an RV, tape is utilized instead of screws.

You should investigate how your duct organization is connected to crucial elements and make security system adjustments.

Earlier Than Replacing the Thermostat

Before changing a thermostat when it starts acting up, it is a good idea to verify the following often occurring issues that are the root of the issue.

  • Inspect the batteries – they could have lost power earlier than you anticipated. When your thermostat is powered by batteries, this is a regular problem.
  • If the display screen is blank, it is broken and can only be fixed by replacing the device. Analog thermostats need to be manually examined again to see whether they have malfunctioned.
  • The difference between the room temperature and the setting set on the thermostat is the result of your furnace and air conditioner receiving the incorrect signals. To verify this, you would need to use a different thermometer first.

Replacement is your only option if they don’t agree since the RV’s thermostat is faulty. If you hear clicking, the thermostat is not broken or in need of repair.

  • Heat/AC not going on or off. The thermostat is the one that has been severed when there is no click or clicking sound. Either it has to be fixed or replaced.

Final Thoughts

Using information technology, you could use the thermostats from your RV.

But those home appliances should be battery-operated, else they won’t function without rewiring.

As long as you place the cables in the proper location, upgrading your electric thermostats is also a wise choice.

You can replace the part yourself, but hiring a professional to do it lowers the likelihood of a problem.

How To Upgrade Your RV Thermostat (DIY: Honeywell) – Wandering Wagners
CAN RESIDENTIAL THERMOSTATS BE USED IN AN RV???: Full-Time RV’er Upgrades RV Thermostat to Digital – Ryan & Megan

How To Change Dometic Thermostat To Fahrenheit Videos Suggestions From Youtube

Dometic Thermostat How To Use – Darian Pellicciotti
RV THERMOSTAT [How to change from Fahrenheit to Celsius] Its not that cold or is it? – Max Your Journey
Dometic RV Thermostat Basics – John Marucci

Updated on

Written by Bob Matsuoka
Bob Matsuoka is a blogger and founder of RVing Beginner blog. He has been blogging for over five years, writing about his own family’s RV adventures, tips for people who are interested in buying an RV or taking their family on an adventure by RV.